Mountaineer V8-302 5.0L VIN P EFI (1998)
3. If the concern remains after the inspection, connect the New Generation STAR (NGS) Tester to the Data Link Connector (DLC) located beneath
the instrument panel and select the vehicle to be tested from the NGS menu. If the NGS does not communicate with the vehicle:
-
check that the program card is properly installed.
-
check the connections to the vehicle.
-
check the ignition switch position is in RUN.
If the NGS still does not communicate with the vehicle, go to Pinpoint Test M. See: Pinpoint Tests/M: No Module/Network Communication
4. Go to Pinpoint Test PC (Pre Check).See: System Precheck