Mountaineer V8-302 5.0L VIN P EFI (1998)
Transmission Position Switch/Sensor: Service and Repair
Special Tools
REMOVAL
1. If equipped, turn the air suspension switch off.
2. Place the transmission range selector lever in the neutral position.
3. Disconnect the battery ground cable.
4. Raise and support the vehicle.
5. Disconnect the shift cable.
1
Disconnect the shift cable from the manual control lever.
2
Disconnect the shift cable from the bracket.
6. Disconnect the digital Transmission Range (TR) sensor electrical connector.
7. Remove the manual control outer lever nut and manual control outer lever.