Mountaineer V8-302 5.0L VIN P EFI (1998)
Multifunction Electronic Control Module: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
2. Remove the radio chassis.
3. Remove the center instrument panel finish panel.
1
Remove the rear wiper knob.
2
Remove the screws.
3
Remove the center instrument panel finish panel.
4. Remove the GEM/CTM.
1
Remove the screw.
2
Disconnect the four connectors from the GEM/CTM.
3
Remove the GEM/CTM.
INSTALLATION