Mountaineer V8-302 5.0L VIN P EFI (1998)
12. Install the differential pinion bearing and the front axle drive pinion shaft oil slinger.
13. CAUTION: Installing the pinion seal without the correct tool can result in early seal failure.
CAUTION: If the pinion seal becomes cocked during installation, remove it and install a new one.
Using the special tool, install the pinion seal.
14. Lightly lubricate the pinion gear splines.
-
Use Motorcraft SAE 80W90 Thermally Stable 4x4 Axle Lubricant meeting Ford specification WSP-M2C197-A.
15. Position the pinion gear in the differential housing.
16. CAUTION: Never use a metal hammer on the pinion flange or install the flange with power tools. If necessary, use a plastic hammer to tap on a