Mountaineer V8-302 5.0L VIN P EFI (1998)
52. CAUTION: Install the differential housing cover within 15 minutes of applying the silicone or it will be necessary to apply new sealant. If
possible, allow one hour before filling the axle with lubricant to make sure the silicone sealant has cured.
Install the differential housing cover.
1. Position the differential housing cover.
2. Install the bolts.
53. Install the front axle assembly.
54. Fill the axle with 1.54 Liter (2.25 pints) of lubricant.
-
Use Motorcraft SAE 80W90 Thermally Stable 4x4 Axle Lubricant meeting Ford specification WSP-M2C197-A.
Bushing
Special Tools
Removal
1. NOTE: Axle tube bushing removal shown, axle housing bushing is a similar procedure.
Remove the front axle assembly.