Mountaineer V8-302 5.0L VIN P EFI (1998)
15. Remove the lower rear shock absorber retainer nuts and bolts from all three shock absorbers.
16. Remove the U-bolt and nut assemblies.
17. CAUTION: Be careful of obstructions and of causing damage to vehicle component when performing this step.
Raise the rear axle off the rear springs and manipulate the rear axle from the vehicle.
INSTALLATION
1. CAUTION: Be careful of obstructions and of causing damage to vehicle components when performing this step.
Raise the rear axle with a suitable jack and set the rear axle on the rear springs.
2. Install the rear spring plate nut assemblies and tighten.