mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Brake Master Cylinder|Removal and Installation|Page 6752 > < General Procedures|Page 6749
Page 1
background image

Brake Master Cylinder: Service and Repair
Removal and Installation

Removal 

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.
 

1. Disconnect the brake fluid level warning switch.

2. On cruise control equipped vehicles, disconnect the brake pressure switch.

3. Disconnect the two brake lines, and plug the lines and the brake master cylinder ports.

4. On vehicles with 4.0L engine, remove the wiring retainer clip from the master cylinder.

Brake Master Cylinder|Removal and Installation|Page 6752 > < General Procedures|Page 6749