Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Valve Cover: Service and Repair
RH
Removal
1. Disconnect the battery ground cable.
2. Disconnect the spark plug wires.
3. Drain the cooling system.
4. Disconnect the crankcase ventilation tube from the valve cover.
5. Disconnect the upper radiator hose from the intake manifold.
6. Disconnect the mass air flow (MAF) sensor and the generator electrical connectors.
7. Disconnect the heater water hose.
8. Remove the accelerator cable control snow shield.