Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
6. Position the air bag deployment chute.
1
Insert the outboard side of the air bag deployment chute between the seat back pad and the side air bag module, pulling it around the outboard
side of the seat back frame.
2
Insert the inboard side of the air bag deployment chute between the seat back pad and the side air bag module from the inboard side of the seat
back.
WARNING:
^
CHECK THE SIDE AIR BAG DEPLOYMENT CHUTE AND ZIPPER FOR DAMAGE. THE DEPLOYMENT CHUTE AND
ZIPPER MUST NOT BE REPAIRED. IF THERE IS ANY DAMAGE TO THE DEPLOYMENT CHUTE OR ZIPPER THE SEAT
BACK TRIM COVER AND DEPLOYMENT CHUTE MUST BE INSTALLED NEW AS A UNIT.
^
IF THE AIR BAG DEPLOYMENT CHUTE IS NOT PROPERLY POSITIONED AND COMPLETELY ZIPPED, THE SIDE AIR
BAG MAY NOT DEPLOY PROPERLY.
7. Zip the air bag deployment chute completely closed, then position the zipper tail at the top and bottom of the deployment chute, into the seat back
opening.
^
The side air bag deployment chute must encircle the side air bag module, going completely around the side air bag module and the side of the
seat back frame.
^
Align the side air bag deployment chute to the side air bag module, making sure it covers the length of the side air bag module.
NOTE: Be sure the side air bag deployment chute is properly positioned, before proceeding.
8. Unroll the seat back trim cover to the bottom row of hog rings.