Mountaineer 2WD V6-4.0L VIN E (1999)
1. NOTE: Lubricate the parts with Super Premium SAE 5W30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification
WSS-M2C153-G before installing.
Install the camshaft.
2. NOTE: The camshaft bearing caps must be installed in the original position.
NOTE: After installing the bolts, check the camshaft for free rotation.
Position the camshaft bearing caps and bolts and tighten in sequence in two steps.
-
Step 1: 6 Nm (53.5 inch lbs.).
-
Step 2: 15-17 Nm (11-12.5 ft. lbs).
3. NOTE: The camshaft sprocket must turn freely on the camshaft.
Install the bolt; DO NOT tighten the bolt.
