Mountaineer 2WD V6-4.0L VIN K (2007)
![background image](/mercury/mountaineer_2wd/v6-4.0l_vin_k/Page-2489007.png)
4. Remove the B-pillar upper trim panel retaining clip from the lower right corner of the panel.
5. Remove the B-pillar upper trim panel retaining clip from the upper left of the panel.
6. To install, reverse the removal procedure.
-
Be sure the hole on the back of the B-pillar upper trim panel is seated over the safety belt D-ring bolt.
C-Pillar Trim Panel
C-PILLAR TRIM PANEL - EXPLORER, MOUNTAINEER