Mountaineer 2WD V6-4.0L VIN K (2007)
![background image](/mercury/mountaineer_2wd/v6-4.0l_vin_k/Page-2589086.png)
Second Row, 40 Percent Bench, Cushion
Exploded View
Removal and Installation
1. Release all of the seat backrest J-clips. Slightly raise the backrest trim cover.
2. Remove all of the staples in the backrest trim cover.
3. Pull the seat backrest material up and remove the 4 backrest bolts. Remove the backrest assembly.
-
To install, tighten to 23 Nm (17 lb-ft).
4. To install, reverse the removal procedure.