Mountaineer 2WD V6-4.0L VIN K (2007)
3. NOTE: The oil cooler threaded insert is part of the oil cooler and is not removed.
Loosen the oil cooler threaded insert and position the oil cooler aside.
^
To install, tighten to 57 Nm (42 ft. lbs.).
All vehicles
4. Remove the bolt and the oil filter adapter.
^
To install, tighten to 57 Nm (42 ft. lbs.).
5. To install, reverse the removal procedure.
^
Install a new oil filter.
^
Check the engine oil and fill as necessary.