Mountaineer 2WD V6-4.0L VIN K (2007)
Removal
1. Remove the flexplate.
2. Remove the spacer plate.
3. Remove the flexplate-to-crankshaft spacer.
4. NOTE: The crankshaft rear seal may have a metal speedy sleeve. This sleeve must be removed before attempting to remove the seal.
If necessary, remove the speedy sleeve using 2 screwdrivers or small pry bars.
5. CAUTION: Avoid scratching or damaging the crankshaft rear seal running surface during removal of the crankshaft rear seal.
Using the special tool, remove the crankshaft rear seal.
