Mountaineer 2WD V6-4.0L VIN K (2007)
Vehicle Lifting: Description and Operation
JACKING
WARNING:
-
Do not run the engine when jacking the vehicle. The wheels contacting the ground could cause the vehicle to move.
-
Make sure the jack and jack stands are correctly located to prevent the vehicle from falling.
CAUTION:
-
A wheel chock should be used to prevent the vehicle from rolling and falling off the jack.
-
Position the jack to avoid contact with the fuel tank.
The following offers general guidelines for vehicle jacking. Additionally, jack manufacturers offer their own operating precautions. Be sure to read and
understand operating instructions for the jacking equipment before use.
Jacking Points
NOTE: Place a wheel chock diagonally opposite of the wheel to be raised.
The front jacking points are indicated by a cut-out in the frame, located behind the front tire and wheel.
CAUTION: Do not use the differential housing as a lift point. Leaks or damage to the rear axle cover and adjoining differential housing
