mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Rear Knuckle Alignment Link|Service and Repair|Page 7068 > < Rear Knuckle|Service and Repair|Page 7064
Page 1
background image

Rear Knuckle Alignment Link: Service and Repair

Toe Link

Toe Link

Removal

CAUTION:  Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in
major service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of
these parts.

CAUTION:  Orientation of the suspension fasteners is important. Make sure the fasteners are installed in the same direction as they were in
when removed.

1. Measure the distance from the center of the hub to the lip of the fender with the vehicle in a level, static ground position (curb height).

Rear Knuckle Alignment Link|Service and Repair|Page 7068 > < Rear Knuckle|Service and Repair|Page 7064