Mountaineer 2WD V6-4.0L VIN K (2007)
Seals and Gaskets: Service and Repair
Extension Housing Seal
Extension Housing Seal - Rear Wheel Drive (RWD)
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the driveshaft.
3. Using the special tools, remove the extension housing seal.
Installation
1. NOTE: Make sure the extension housing seal is correctly installed onto the special tool and the garter spring is in the correct position.
Using the special tool, install the extension housing seal.