Mountaineer 2WD V6-4.0L VIN K (2007)
![background image](/mercury/mountaineer_2wd/v6-4.0l_vin_k/Page-1523001.png)
Transmission Mount: Service and Repair
Transmission Support Insulator - Rear Wheel Drive (RWD)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Support the transmission with a transmission jack.
3. Remove the transmission support insulator nuts.
4. Remove the 2 transmission support insulator bolts.
5. Raise the transmission and remove the transmission support insulator.
Installation
1. Install the transmission support insulator and lower the transmission onto the transmission support insulator.