Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Front Fender: Service and Repair
FENDER - FRONT
Removal
1. Remove the grille opening panel reinforcement.
2. Remove the front bumper (17757).
3. Remove the front panel of the rocker panel trim or, if equipped, the running board(s).
4. Remove the front wheel and tire assembly.
5. Remove the front fender apron (16054).
1. Remove the screws.
2. Remove the bolts.
6. Remove the lower fender to rocker panel bolts and spacers.
7. NOTE: The front door must be open to gain access to the fender bolt.
Remove the fender bolt.