Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Power Door Lock Actuator: Service and Repair
Front Door Actuator
Heavy Duty Riveter
SPECIAL SERVICE TOOLS
REMOVAL
1. Remove the front door trim panel.
2. Remove the watershield
3. Remove the power door lock actuator.
1
Disconnect the electrical connector.
2
Drill out the rivet.
3
Disconnect the actuator rod.
4
Remove the actuator.
INSTALLATION
1. To install, reverse the removal procedure.
-
Use Heavy-Duty Riveter to install the actuator rivet.