Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
7. Remove and discard the hog rings.
1
Fold back the seat cushion trim cover to expose the hog rings.
2
Remove and discard the hog rings.
NOTE: The hog rings along the front of the seat are shown, the hog rings along either side are similar.
8. If equipped, and if necessary, remove the seat cushion heating element from the seat cushion foam.
CAUTION: Any time the seat cushion heating element is removed from the seat cushion foam, the foam must be replaced.
NOTE: Sport bucket seat shown; Limited seat similar.
9. Disconnect the heated seat module electrical connector.