Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Manual
DISASSEMBLY
1. Disassemble the manual front bucket seat. For additional information, refer to Seat-Front Bucket, Manual.
2. Disconnect the seat cushion trim cover J-clips.
3. Remove the seat cushion trim cover.
-
Disconnect the seat trim cover from the hook and loop strips.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the
seat cushion foam.
4. Remove the seat cushion.
-
Disconnect the front and rear J-clips.