Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
8. CAUTION: The front end accessory drive bracket bolts require special torque values. Proper tightening is necessary to prevent excessive
accessory drive vibrations.
Note: Make sure to tighten the generator bracket in two steps.
Install the generator bracket and tighten the bolts in sequence.
-
Step 1: Tighten bolts 1 and 2 to 35 Nm (26 ft. lbs.).
-
Step 2: Tighten bolt 3 to 65 Nm (48 ft. lbs.).
9. Tighten the remaining bolt.
10. Install the drive belt tensioner.
11. Install the air cleaner outlet tube.
12. Connect the battery ground cable.