Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Instrument Panel Circuit Board: Service and Repair
REMOVAL
WARNING: ILLUMINATION BULBS ARE PRESSURIZED AND MAY SHATTER IF IMPROPERLY HANDLED. WEAR EYE
PROTECTION WHEN REPLACING ILLUMINATION BULBS.
CAUTION: If gauges are being removed from the cluster assembly, do not remove the gauge pointers. Magnetic gauges cannot be recalibrated.
1. Remove the instrument cluster; refer to Instrument Panel.
2. Remove the illumination and indicator bulbs; refer to Warning Indicator Bulb.
3. Remove the gauges; refer to Gauges.
4. Remove the nineteen instrument gauge clips.
NOTE: Do not reuse instrument gauge clips.
5. Remove the instrument cluster printed circuit.
INSTALLATION
1. To install, reverse the removal procedure.