Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
16. Disconnect the passenger seat side air bag module electrical connector located under the passenger seat.
17. Connect the restraint system diagnostic tool 418-133 to the body harness side of the passenger seat side air bag module electrical connector.
18. Disconnect the driver seat side air bag module electrical connector located under the driver seat.
19. Connect the restraint system diagnostic tool 418-133 to the body harness side of the driver seat side air bag module electrical connector.
All vehicles
20. Install the RCM fuse F2 (7.5A) to the CJB and close the cover.
21. Connect the battery ground cable.
Reactivation Procedure
All vehicles
1. Remove the RCM fuse F2 (7.5A) from the CJB and close the cover.
2. Disconnect the battery ground cable and wait at least one minute.
Vehicles equipped with seat side air bags
3. Disconnect the restraint system diagnostic tool from the body harness side of the driver seat side air bag module electrical connector located under
the driver seat.
4. Connect the driver seat side air bag module electrical connector.
5. Disconnect the restraint system diagnostic tool from the body harness side of the passenger seat side air bag module electrical connector located
under the passenger seat.
6. Connect the passenger seat side air bag module electrical connector
All vehicles
7. Disconnect the restraint system diagnostic tool from the body harness side of the passenger air bag module electrical connector.
8. Install the passenger air bag module.
9. Connect the passenger air bag module electrical connector.