mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Powertrain Control Module Power Relay <--> [Main Relay (Computer/Fuel System)] > < Inertia Fuel Shutoff Switch|Locations|Page 4746
Page 1
background image

Intake Air Duct: Service and Repair

REMOVAL

NOTE:  The 5.0L engine is shown, the 4.0L (push rod) engine is similar.

1. Remove the air cleaner outlet tube.

^

Loosen the clamps.

^

Disconnect the vent hose.

INSTALLATION

1. To install, reverse the removal procedure.

NOTE:  Make sure the screw clamps do not interfere with the throttle body cam.

Powertrain Control Module Power Relay <--> [Main Relay (Computer/Fuel System)] > < Inertia Fuel Shutoff Switch|Locations|Page 4746