Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
![background image](/mercury/mountaineer_2wd/v8-302_5.0l_vin_p_sfi/Page-1156001.png)
Throttle Position Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the accelerator control snow shield.
3. Remove the Throttle Position (TP) sensor.
1
Disconnect the electrical connector.
2
Remove the sensor.
INSTALLATION
1. To install, reverse the removal procedure.