Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
11. Unroll the seat backrest trim cover to the second row of hog rings.
12. Install the hog rings.
13. Unroll the seat backrest trim cover to the bottom row of hog rings.
14. Install the hog rings.
15. Hook the trim cover clip.
NOTE: If equipped, make sure that the seat backrest heating element wire is aligned with and off-set from the lower seat backrest trim cover
J-clip.
16. Assemble the seat. For additional information, refer to Seat-Front Bucket, 6-Way Power, Except Limited and Seat-Front Bucket, Limited.
NOTE: Be sure to read and follow all air bag warnings in Seat-Front Bucket, 6-Way Power, Except Limited and Seat-Front Bucket, Limited,
Disassembly and Assembly.
17. Reactivate the supplemental restraint system. For additional information, refer to Air Bag Systems.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
18. Prove out the air bag system. For additional information, refer to Air Bag Systems.
19. Check the restraint system for proper operation.
Sport Bucket Seat
REMOVAL