Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
9. Disconnect the tie-rod ends.
1
Remove and discard the cotter pins.
2
Remove the castellated nuts.
3
Separate the tie-rod ends from the steering knuckles. Do not damage the tie-rod end seals.
10. Remove the LH tie-rod end.
^
Count and record the number of turns required to remove the LH tie-rod end.
11. Remove the front stabilizer bar.
^
Mark the driver side end of the stabilizer bar for correct installation.
12. Remove the power steering fluid cooler to crossmember nuts.
13. Disconnect the power steering return line hose at the power steering fluid cooler.
^
Allow the system to drain.