Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
30. Remove the steering gear from the vehicle.
Installation
1. Using the special tool, install new seals on the power steering return hose and power steering pressure hose.
2. Note: Make sure the steering gear input shaft is turned to the left until the stop is reached.
Note: Handle the steering gear with caution to avoid damage to fluid transfer tubes and to avoid dimples in the tie-rod boots.
Turn the steering gear input shaft to the right until the stop is reached. Note the number of turns required.
3. Note: Make sure the steering gear control valve housing is turned toward the front of the vehicle.
Install the steering gear into the RH opening of the crossmember.