Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
7. Push in the transmission shift cable adjustment lock tab on the shift cable body.
8. Note: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Lower the vehicle.
9. Remove the 3.6 kg (8 lb.) weight.
10. CAUTION: Do not adjust the transmission shift cable in any position other than (D).
Verify that the vehicle will start in P or N and that backup lamps illuminate in R. If not, repeat Steps 1 through 7 and perform a digital
transmission range sensor alignment.
