Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Shift Lock Actuator: Service and Repair
Removal
1. Remove the steering column assembly.
2. Remove the insert plate and shift lock actuator.
1. Remove the bolts.
2. Remove the insert plate and shift lock actuator.
3. Note: The shift lock actuator clip is an assembly aid for the assembly plant and does not need to be replaced.
Remove the insert plate from the shift lock actuator.
-
Remove and discard the shift lock actuator clip.
Installation
1. Follow the removal procedure in reverse order.