Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
1. Install the clutch release hub and bearing.
-
Lubricate the clutch release hub and bearing at sliding points with Premium Long-Life Grease XG-1-C or -K or equivalent meeting Ford
specification ESA-M1C75-B.
1. Position the (A) spring and the (B) clutch release hub and bearing onto the clutch slave cylinder.
2. Push the clutch release hub and bearing against the spring and install the retainer ring.
2. Install the clutch slave cylinder.
1. Position the clutch slave cylinder.
2. Install the bolts.
3. Install the transmission.
