Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
5. Position the special tool hand-tight on top of the differential clutch pack.
6. Install the special tool over the disc and differential clutch pack.
7. Install the nut.
8. Note: Clutch Pack Kit FSAZ-4947-BA is available to rebuild the 8.8-inch ring gear Traction-Lok differential.
Using the special tool, determine the thickness of the new clutch shim.
-
Insert the thickest blade that will enter between the tool and the differential clutch pack.
Selective Shims
9. Remove the special tool from the clutch pack and side gear assembly.
10. Install the shims on the clutch pack and side gear assembly.
