Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
![background image](/mercury/mountaineer_2wd/v8-302_5.0l_vin_p_sfi/Page-1817007.png)
6. Install progressively larger shims on the right side until the largest shim selected can be assembled by hand.
7. Install the right side bearing cap and tighten the left side and right side bolts to specification.
8. Rotate the differential case to make sure it rotates freely.
Measuring backlash
9. Use the special tool to measure the ring gear backlash.
-
If the backlash is within specification, go to Backlash within specification in this procedure.
-
If a zero backlash condition occurs, go to Zero backlash in this procedure.