Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
Rear Door Window Motor: Service and Repair
REMOVAL
1. Raise and support the rear door window glass to the full up position.
2. Disconnect the battery ground cable.
3. Remove the rear door trim panel.
4. Remove the speaker.
1
Remove the screws.
2
Disconnect the electrical connector.
3
Remove the speaker.
5. Remove the watershield.
6. Remove the power window motor.
1
Remove the bolts.
2
Disconnect the electrical connector.
3
Remove the power window motor.
INSTALLATION