Mountaineer 2WD V8-302 5.0L VIN P SFI (2000)
11. Install the windshield glass aligning it to the marks previously made.
12. After the windshield glass is set , check for water leaks and add urethane sealant where needed.
13. Install the upper windshield weatherstrip.
14. If necessary, remove excess urethane from the outside surface of the windshield glass.
15. Install the LH and RH windshield mouldings.
16. Install the cowl grille.
17. If equipped, install the overhead console.
18. Install the sun visor clips.
1
Install the sun visor clips.
2
Install the screws.