Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
![background image](/mercury/mountaineer_2wd/v8-4.6l_sohc_vin_w/Page-1009006.png)
1. CAUTION: While servicing the power steering system, make sure to plug all open hoses, line fittings, and fluid ports to prevent the entry of
contaminants, or premature failure of power steering components can result.
Remove the power steering reservoir bolts.
2. Loosen the clamps, disconnect the hoses and remove the reservoir.
^
Drain the fluid into a suitable container.
3. Using the special tool, remove the power steering pump pulley.
4. Remove the nuts and position the wiring bracket out of the way.
Item 2: Power Steering Pressure Hose Removal Note