Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
18. As a post - check, verify correct alignment of all timing marks.
19. Install the crankshaft sensor ring on the crankshaft.
Item 24: Engine Front Cover Installation Note
1. NOTE: If the engine front cover is not secured within four minutes, the sealant must be removed and the sealing area cleaned with metal surface
cleaner. Allow to dry until there is no sign of wetness, or four minutes, whichever is longer. Failure to follow this procedure can result in future oil
leakage.
Apply silicone gasket and sealant in the locations shown.