Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
Evaporator Case: Service and Repair
Main Climate Control
HEATER CORE AND EVAPORATOR CORE HOUSING, ASSEMBLY AND COMPONENTS
REMOVAL
NOTE:
-
If an evaporator core leak is suspected, the evaporator core must be vacuum leak tested before it is removed from the vehicle.
-
Installation of a new accumulator is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a failed A/C compressor or damage to the accumulator.
-
New O-ring seals, lubricated in clean PAG oil, must be installed before reconnecting any A/C fitting which has been disconnected.
-
Lubricate the coolant hoses with plain water only if needed.
1. Recover the refrigerant.
2. Remove the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Removal and
Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
3. Remove the components in the order indicated in the illustration and table.