Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
All vehicles
18. NOTE: Make sure the battery negative cable is still disconnected before continuing with the reactivation portion of this procedure.
Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
19. Connect the passenger air bag module electrical connector.
20. Close the glove compartment.
21. Remove the restraint system diagnostic tools from the clockspring electrical connector at the top of the steering column.
22. Position the driver air bag module to the steering wheel.
1
Connect the horn switch electrical connector.
2
CAUTION: The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag module. Match the
electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver air bag module.