Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
Illustration 4 Of 4
7. Illustration 4 of 4. Remove the components in the order indicated in the illustration and table.
Item 24: Throttle Body Adapter Removal Note
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These
tools cause scratches and gouges that make leak paths. Use a plastic scraping tool to clean the sealing surfaces.
Clean and inspect the sealing surfaces. Inspect and install a new gasket, if necessary.
Item 31: Fuel Injector O-Ring Removal Note
1. Install new O-rings on the fuel injectors. Lubricate the new fuel injector O-rings with clean engine oil.
INSTALLATION
1. To install, reverse the removal procedure.
