Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
18. Remove the LH C-pillar trim panel.
1
Pull out and release the retaining clips.
2
Pull out and release the retainer.
3
Lower the door opening weatherstrip, slide the C-pillar trim panel up, releasing the retainers and remove the C-pillar trim panel.
19. Disconnect the LH safety canopy electrical connector.
20. Attach the restraint system diagnostic tool to the vehicle harness side of the LH safety canopy electrical connector.
All vehicles
21. From under the front LH seat, push in to release the tab and disconnect the safety belt buckle pretensioner electrical connector.