Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
Part 2
4. Remove the components in the order indicated in the illustration and table.
Item 4: C-Pillar Tether Anchor Assembly Removal Note
1. Slide the tether anchor assembly up and out to disengage it from the C-pillar.
Item 11: A-Pillar Tether Pin-Type Retainer Removal Note
1. If reusing the same safety canopy, separate the tether from the pin-type retainer. If a new safety canopy is being installed, remove the tether with
the pin-type retainer.
Item 12: Rear Ramp Removal Note