Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
3. Obtain two wires (20 gauge minimum) at least 6.1 meters (20 feet) long and attach one end of each wire to the safety belt buckle pretensioner
wires.
4. Position the safety belt buckle pretensioner assembly on a flat surface in an open outdoor area so that moveable parts do not contact the support
surface.
5. Remain at least 6.1 meters (20 feet) away from the safety belt buckle pretensioner assembly.
6. Deploy the safety belt buckle pretensioner by touching the other ends of the two wires to the terminals of a 12-volt battery.
7. To allow for cooling, wait at least ten minutes before approaching the deployed safety belt buckle pretensioner.
8. Dispose of the deployed safety belt buckle pretensioner in the same manner as any other part to be scrapped.
