Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
4. To install, reverse the removal procedure.
5. Verify that the shift cable is adjusted correctly.
Item 13: Solenoid Body O-Ring Seals Installation Note
1. Install new O-ring seals on the solenoid body connector. Lubricate the O-ring seals with clean automatic transmission fluid.
Item 10 and 11: Solenoid Body Screws Installation Note
1. CAUTION: Inspect the transmission case bore to make sure it is free of foreign material and not damaged. If damaged, a transmission leak may
occur.
Install the solenoid body. Tighten the screws in the sequence shown.
Item 6: Transmission Fluid Pan Installation Note
1. Install the transmission fluid pan and gasket and loosely install the screws.