Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
Install the digital TR sensor and loosely install the screws.
Item 22: TR Sensor Screws Installation Note
1. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.
Item 26: TR Sensor Electrical Connector Installation Note
1. Connect the digital TR sensor connector.
2. Move the rubber boot back over the connector.
