Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
![background image](/mercury/mountaineer_2wd/v8-4.6l_sohc_vin_w/Page-1704002.png)
1. Remove the intermediate shaft speed sensor.
1
Remove the intermediate shaft speed sensor screw.
2
Remove the intermediate shaft speed sensor from the transmission.
^
Inspect the intermediate shaft speed sensor O-ring for damage. If damaged, install a new O-ring.
Item 3: Speed Sensor Installation Note
1. Inspect and lubricate the O-ring with petroleum jelly.
1
Install the intermediate shaft speed sensor into the transmission.
2
Tighten the screw.