Mountaineer 2WD V8-4.6L SOHC VIN W (2003)
1. Install the reverse servo. Tighten the screws in the sequence shown.
Item 14: Solenoid Body O-rings Seals Installation Note
1. Install new O-ring seals on the solenoid body connector. Lubricate the O-ring seals with clean automatic transmission fluid.
Items 11,12 and 13: Solenoid Body and Screws Installation Note
1. CAUTION: Inspect the transmission case bore to make sure it is free of foreign material and not damaged. If it is damaged, transmission leak
may occur.
Install the solenoid body. Tighten the screws in sequence shown.
Item 10: Transmission Fluid Pan Filter Installation Note
1. CAUTION: Lubricate the fluid filter seals with clean automatic transmission fluid or they may be damaged.
NOTE: Make sure that the fluid filter seals are correctly seated on the filter.