Mountaineer 2WD V8-4.6L VIN 8 (2006)
Removal and Installation
1. Remove the 2 screws and the latch feet release bar.
2. Release all the cushion trim cover retainers and pin-type retainers.
3. CAUTION: Use care when separating the cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn from
the cushion foam pad.
Release the hook and loop strips and remove the cushion trim cover from the cushion foam pad.
4. To install, reverse the removal procedure.
Seat Cushion Cover - Second Row, 60 Percent E-Z Entry
SEAT CUSHION COVER - SECOND ROW, 60 PERCENT, E-Z ENTRY
Removal and Installation
1. Remove the 2 screws and the latch feet release bar.
2. Release all the cushion trim cover retainers and pin-type retainers.
3. CAUTION: Use care when separating the cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn from
the cushion foam pad.
Release the hook and loop strips and separate the cushion trim cover from the cushion foam pad.
4. To install, reverse the removal procedure.
-
After installation, make sure the LATCH and safety belt buckles are accessible to the occupants.
Seat Cushion Cover - Second Row, 40 Percent, Bench
SEAT CUSHION COVER - SECOND ROW, 40 PERCENT, BENCH
Removal and Installation
1. Remove the second row, 40 percent of 60/40 bench seat.
2. CAUTION: Use care when separating the cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn from
the cushion foam pad.
Release the J-clips, separate the hook and loop fasteners, remove the hog rings and the cushion trim cover.
3. To install, reverse the removal procedure.
Seat Cushion Cover - Second Row, 60 Percent, Bench
SEAT CUSHION COVER - SECOND ROW, 60 PERCENT, BENCH
Removal and Installation
1. Remove the second row, 60 percent seat.
2. CAUTION: Use care when separating the cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn from
the cushion foam pad.
Release the J-clips, separate the hook and loop fasteners, remove the hog rings and the cushion trim cover.
3. To install, reverse the removal procedure.
Seat Cushion Cover - Second Row Bucket
SEAT CUSHION COVER - SECOND ROW BUCKET
Removal and Installation
1. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the
seat cushion foam pad.
Release the cushion trim cover J-clips, separate the hook and loop fasteners and remove one row of hog rings.